📢 [Top Cleaner] AIPURY1500 Cordless Pool Cleaner Have Latest Intelligent Route Plan Tech. Save Up To $300.

How to Prevent Algae in Your Swimming Pool

Owning a pool is a wonderful opportunity, but it does require a fair bit of maintenance. With that blazing summer heat and increasing humidity levels, one potential problem is just around the corner: algae. While algae blooms don’t have to be dangerous, they can be unsightly and leave your pool looking less than appealing. Fortunately, with the right steps, you can keep your swimming pool algae-free, so your pool is always ready for someone to jump right in. In this article, we will discuss how to keep your pool free from algae all summer long!

▶Avoid Stagnant Water

Even though swimming pools are often considered to be relatively stagnant, they don’t need to be. With the right steps you can keep your pool water flowing so there is always a good amount of motion to your water—and this is very important. Algae thrives in stagnant water, and it will not hesitate to build up if you leave your water in a rested state.

The best way to keep your water flowing is to always use your filter and consider investing in a speed pump. These solutions will keep your water active, which will discourage buildup from algae and other unpleasant sources. In general, keeping your water moving will help it to stay clean and make for a much more pleasant experience.

▶Regularly Clean Your Filter

Your filter is easily one of the most important parts of your swimming pool, which means you need to maintain it. A clean filter will be able to do its job and keep your pool clean. On the other hand, if you allow your pool filter to get backed up, you will find that your pool will begin to change. You can expect a buildup of foreign matter, dirt, insects, and algae. Even worse, buildup can damage the filter and cost you more money in the long run. It really pays to regularly clean and maintain your filter. Depending on your pool system, you might even find that your filter plays a role in the pH value of your pool water.

▶Go Swimming

Owning a pool and not using it is a great way to end up in trouble. If you are not present to use and inspect your pool, there is a good chance that it will run into problems or deteriorate without you noticing. Using a pool is a great way to keep a general eye on the pH value and to keep it clean. While filters can be beneficial when it comes to keeping water moving, they aren’t your only option. Regular pool use can also keep your water moving and discourage potential growth. More importantly, you will find that this is a great way to recognize if algae is beginning to bloom so you can stop the problem before it gets worse.

▶Use an Algaecide

If you are worried about potential algae blooms or have had to deal with them in previous years, an algaecide might be your best bet. These specialized biocides are designed to prevent the growth of algae completely. To do this, they disrupt the growth process of the algae in some way. Some algaecides will focus on stopping photosynthesis so the algae cannot feed and thrive, while others personally attack the algae in a physical way, like breaking down a part of the algae to stop it in its tracks.

When used weekly, algaecides can keep a pool clean with ease. For a more natural approach, some people like to use barley straw as a natural algaecide. While the benefits of this method are still being determined, some pool owners swear by it. If you aren’t sure where to start, store bought algaecide can be a much easier option.

▶Manage Your Phosphates

Phosphate test kits can be used as an excellent strategy to detect and prevent algae blooms in your pool. These kits allow you to test to high levels of phosphates, which can increase your level of algae in a pool. By relying on phosphate test kits, you can ensure that your water stays at a good level, or adjust it as needed. If you are showing high levels of phosphates in a pool, you can easily invest in a phosphate remover to help get your swimming pool back in good order.

▶Keep Appropriate Chlorine Levels

While most pool owners know that chlorine plays an important role in keeping pools clean, not everyone knows how this works. Within a pool, there is what is referred to as the free chlorine content. This is a very important number that can influence how clean your swimming pool actually is. The free chlorine content is used to reference the amount of free chlorine in your pool that can help to keep it clean and combat microorganisms.

The free chlorine content is a very important number. If it is too low, there won’t be enough chlorine to actually fight off algae or other microorganisms, which can lead to even more growth or bigger health risks. If the number is too high, you run the risks of inhaling chlorine gas or damaging personal items like the pool cover or even swimsuits.

To maintain appropriate levels, it is important for pool owners to regularly check these levels and adjust as necessary. For a swimming pool, the CDC recommends that the level of free chlorine should be kept above 1 ppm, and most agree that it should be kept below 4 ppm.

▶The Takeaway

Keeping algae out of your pool is easier than you might expect as long as you have the right tools. If you are regularly using your pool and checking on the levels within the water, you should be set. Preventative maintenance like an algaecide can go a long way, particularly if your swimming pool is prone to algae buildup during certain parts of the year.

Being an active pool owner will make it easy for you to keep your water perfect so you can always jump in for a swim and enjoy yourself. If you run into trouble, it might be beneficial to call in experts to maintain your pool for you!


Previous Next

Leave a comment


Please note, comments must be approved before they are published